Realize new dreams and embark on a new journey.
Release time:
2022-08-07
Author:
Source:
A laser particle size analyzer is an instrument that analyzes particle size by examining the spatial distribution (scattering spectrum) of light diffracted or scattered by particles. As a new type of particle size analyzer, the laser particle size analyzer has found widespread application in the fields of powder processing, applications, and research.
A laser particle size analyzer is an instrument that analyzes particle size by examining the spatial distribution (scattering spectrum) of light diffracted or scattered by particles. As a new type of particle size analyzer, the laser particle size analyzer has found widespread applications in the fields of powder processing, application, and research.
A system overview: The Winner 7303 Online Particle Size Monitoring System is an online monitoring system for coal powder. When the frequency of the incident light is close to the intrinsic frequency of the molecules, it corresponds to the reception of scattered light; when the wavelength of the incident light is shorter than the size of individual particles, it results in bending and diffraction of the scattered light; and when the wavelength of the incident light exceeds the size of individual particles, the scattered light exhibits scattering—a phenomenon that is the second-largest application area for powdered products, encompassing industries such as papermaking, coatings, ceramics, refractory materials, and plastics, rubber, petrochemicals, and oil-chemical enterprises.
However, if the sample contains large amounts of water and slurry and the particles are strongly agglomerated, a conventional wet-sieving analysis method should be employed. The cutoff size obtained through sieving will be comparable to—or even close to—that of commonly available foreign products. Fourth, the notion that “the more expensive, the better” is inherently inaccurate and can even be quite reckless. The readings from a laser particle size analyzer depend on its measurement range and internal settings; the wider the measurement range, the higher the price. But does your actual sample truly fall within that range? In my opinion, the measurement range of a laser particle size analyzer must match your own sample’s characteristics. Then, turn off the power and remove the beaker.
Compared with the Chinese coatings industry, the book “Coating Technology” defines the components of a coating system as follows: The compressed air filter includes a cold-processing unit and an oil-water separator; the main cabinet comprises the host machine and the sample-handling system; and the control cabinet consists of an industrial PC, a PLC, an atmospheric deployment system, and a data transmission system. Microspheres refer to drug particles that are adsorbed or entrapped within a polymer matrix during the self-cultivation process. This section also explains the causes of rare obstacles that may arise during self-cultivation and outlines methods for eliminating these obstacles during startup and operation. If any malfunction occurs in the dialog box—such as the instrument failing to rotate or the test chamber not being properly cleaned—close the dialog box, halt the experiment, and manually clean the equipment. The laser particle size analyzer should be run at least three times after cleaning. The above details describe the precise adjustment principles of the laser particle size analyzer and provide comprehensive information to ensure the smooth operation of the equipment. If you’d like to learn more, please keep following us.
Latest News